OMS double tank Performance 45lbs kit

• The harness: This basic harness uses 25 feet of 2 inch nylon webbing material, 3 stainless steel D-rings with weight stops are included. Two at chest level and one on the waist. Easily repositioned for optimal configuration with an OMS Stainless Steel or Alu buckle. A 2 inch sewn crotch strap with a 2 inch Scooter “D” ring is also included. This harness is available to be installed on a diver’s backplate or on the OMS Aluminum or Stainless Steel backplates. Divers that prefer the simplest, most utilitarian harness generally choose this configuration. Available as a Kit or installed on OMS Backplates

    25 feet of webbing for fitting a variety of body types
    3 Stainless Steel 2 inch “D” rings
    Stainless Steel Buckle
    2 inch Crotch Strap with “2” inch Scooter ring

• The Backplate: the SS one has a 2500gr weight and the Aluminium one 800gr.

• The wing: The Performance Double wings are a classical donut-style but perfectly measured to fit a standard double tank configuration and to be no longer nor wider when the wing is empty.  This allows air to pass easily from one side to the other for a perfect streamline, trim and buoyancy control.  It has a single inflator with the corrugated hose connected with a non dumpable elbow connector attached in the top rear middle position.  The dump and overpressure valve is located behind the left hip.  The wings have two bladders, the outside bladder with a TPU laminated liner inside to avoid punctures, tears or deterioration from salt water or chlorine.  The second inner bladder is ultra sonic welded.  The outer bladder has a YKK Large teeth zipper for easy opening and closing and long lasting durability.  The grommets are reinforced with a second ring of material to eliminate potential weak points for wear or tear.  These wings come in 45lbs (20kg), 60lb (27kg) and multiple colors.